Packs/Racks/Baskets

One of the best selling items in Wald's entire catalog, this basket set the precedent for quick-release convenience and is perfect for carrying small bags of groceries. - Made in U.S.A. (Maysville, KY) - This Quick Release Baskets comes with a detachable Slip-on Holder for simple installation - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14 x 9.5 x 9 inches; the basket tapers to 12.25 x x 7 inches - Holder is designed to fit 7/8" handlebar, hooks are 4 1/2" apart - Available in white (133WH) or black (133GB) Powder Coat Finish - Complete basket including the holder weighs 2.4 lbs.

- Made in U.S.A. (Maysville, KY) - Shallow baskets carry notebooks, boxes or other articles that lie flat - Dimensions: 15 x 10 x 4.75 inches; the basket tapers to 13 x 8 inches at the bottom - Extended handlebar clamps fit 7/8" and 1" diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables - Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs - 1372 has a Zinc plated finish; 1372GB has a Black Powder Coat Finish - Complete basket with fittings weighs 2.2 lbs.

The 157's little brother, this basket is just as functional. Some people don't need to cart around large pizzas or multiple full-size grocery bags, so this basket is for the more streamlined commuters and delivery pros. Sturdy one-piece legs offer all the support you'll need when hauling heavier loads. This rack cannot be used on bicycles with front suspension systems or springer forks. - Standard front bicycle basket fits most bikes - Adjustable legs mount to front axle for a secure fit - 18" x 13" x 6" deep - UV Weather-resistant bike basket - Available with wooden bottom to better hold your cargo

• Made in U.S.A. (Maysville, KY) • Shallow baskets carry notebooks, boxes or other articles that lie flat • Dimensions: 18 x 13 x 6 inches; the basket tapers to 15.75 x 10.5 inches at the bottom • Extended handlebar clamps fit 7/8" and 1"diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables • Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs • 1392 has a Zinc plated finish and 1392GB has a Black Powder Coat Finish • Complete basket with fittings weighs 2.6 lbs.

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams

MTX QuickTrack® compatible TrunkBag featuring a divided main compartment constructed with our unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips. - Compartment: 1 divided main, two side zippered, Multi-expanding top - Capacity: 8L - Max load: Limited to rack's maximum load rating - Material: 600 denier polyester - Insulation: Rigid EVA foam - Bag Attachment: MTX QuickTrack® 2.0 - Size: 35 x 21 x 19 cm - Weight: 849 g - Features: Water bottle holder, Shoulder strap, carrying handle, 3M™ reflective strip, Safety light clip, Reflective elastic cord, Mesh pocket

Easily add 2L of storage. Fastens to the top and down tubes by adjustable Velcro straps, the ADV Frame Bag incorporates extended-width top tube strap to better keep the bag securely in place over rough terrains. Easy access to the main compartment with a waterproof zipper opening on the drive side, with a zippered mesh pocket on the non-drive side for small item storage. - Fastens to top tube and down tube - Main body (2L compartment) access via a zipper on the drive side - Mesh pocket with the zipper on the non-drive side - PU coated splash resistant 600 denier Nylon - Water-resistant polyurethane coating on all zippers - Fits up to 160mm top tube circumference and 220mm down tube circumference - Capacity: 122 cu in (2L) - Dimension: 37.5cm (L) x 4cm (W) x 15.5cm (H) - Weight: 175g

Pack for an ADVenture without adding a rear rack. The ADV Seat Bag easily fastens to the seat post and seat rails with Velcro straps for a secure fit. The backloading 5L storage compartment may be rolled up to adjust to a smaller volume. Waterproof zipper opening on the drive side for easy access to the main compartment without unrolling. Additional mesh pocket on non-drive side for storing smaller items. PU coated splash resistant Nylon body for all-weather use. - Fastens to saddle rail and seat post - Additional access to the main body (5L compartment) via a zipper on the drive side - May be rolled up to adjust volume - Mesh pocket with the zipper on the non-drive side - PU coated splash resistant 600 denier Nylon - Water-resistant polyurethane coating on all zippers - Fits 25.4 - 34.9mm seatposts - Capacity: 305 cu in (5L) - Dimension: 44cm (L) x 10cm (W) x 13cm (H) - Weight: 215g

This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.

If you have to carry a bunch of gear, you're going to need a front rack. Sunlite's Gold Tec Front Rack has a capacity of 40 pounds, turning your bike into a serious workhorse. It's made from tubular aluminum and mounts to most fork bosses.

- Used for attaching rear racks onto mono stay bikes - Rubber coated steel for all weather durability

- Used for attaching rear racks to monostays or seatposts on bikes without traditional seatstays - Rubber coated steel for all weather durability

The Demi Porteur Rack is a wide but compact rack that installs on your fork's mini rack mounts or via P-clamps (included). Ideal for supporting larger bar bags like an Ocean Air Docena or Ostrich F-702 or a wire basket - Aluminum construction - Platform: 26cm x 30cm - 10kg load capacity - Includes Manny Strap - Weight: 530g - Satin polish silver or Black - Made for us by the folks responsible for Tanaka Fenders. If installing to a braze-on, the braze-on needs to be about 140mm from the brake hole on the crown. If your braze-on is too low, you will need to install using P-clamps on the legs.

Our Seatpost Clamps with rack mounts provide a stable spot to mount your rear rack stays to on bikes without seatstay braze-ons. Very handy. Also great for light mounts, a saddlebag stabilizer, or anything else you problem solving people tend to dream up. Unless you’re thinking about towing a jet ski with it. Let’s be reasonable. Tech Details - Available in 31.8 mm and 34.9 mm diameters - Alloy clamp - Stainless steel bolt - Threaded to accept standard M5 bolts

Disc brake compatible rear rack. We named the Versa Rack for the fact that it’s versatile enough to fit 26”, 650b, 700c, and 29” bikes and fit over disc brakes with ease. The upper stays and lower mounts have a great range of adjustability for easy installation. Make hauling gear effortless with this robust yet simple rack.

PDW Bodega Basket features all-aluminum construction for all-weather durability. Easy-to-use Klickfix bracket securely holds rack to handlebars and allows easy removal for shopping. - Integrated lock holder

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

If you sometimes have trouble deciding which extra T-shirts to take along, or whether you should take two pairs of shoes or three, you may want to switch to Ortlieb because the world's largest waterproof bike bags have plenty of space for everything you need. The Back-Roller Pro Plus is the XL version of the popular Back-Roller Plus touring bag. With a volume of 70 liters per pair, it offers almost twice as much stowage space. It's also the first Ortlieb Back-Roller with an additional front pocket. Although not waterproof, the pocket is unusually practical, offering 4 liters of space for water bottles, sunscreen, wet things, and other items. The durable Cordura fabric gives the bag a noble, woven-fabric look, and is also completely PVC-free. The proven roll closure keep the contents of the inner compartment clean and dry at all times. Thanks to the ingenious QL2.1 system with its self-closing hooks, you can conveniently mount your bags on almost any bike rack. - XL rear panniers (pair) with roll closure for extended touring with lots of equipment - Outer front pocket (2 x 4 L) folds flat, with reflective thread, ideal for damp clothing - Material: PU-laminated Cordura - Integrated inner pocket and shoulder strap - Easy to clean inside - Two strong 3M Scotchlite reflectors - QL2.1 mounting system for racks with tube diameter max. 16 mm - 20 mm hook available as accessory (e.g. for e-bikes) - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch-function protecting the rack from abrasions - Upper QL-hooks and lower hook adjustable without requiring any tools - Lower hook with anti-scratch function protecting the rack from abrasions - Symmetrical shape allows use on right or left side - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L

For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm

Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models. DETAILS: - 1 shoulder strap with carabiners

Lightweight aluminum tubing, stainless steel hardware, and fully adjustable upper stays make the Pork Chop rack a durable addition to any bike. - Fits most 700c cantilever and disc brake bikes - Tubular aluminum construction, 10mm diameter - Stainless steel hardware - Fully adjustable upper mounting brackets - W-bend at bottom of rack for easy on-and-off of hook-style panniers - Platform Dimensions: 10.75 x 4.88" - Weight: 650g - Weight Limit: 40 lbs.

Lezyne takes seatpack storage to the next level with their M-Caddy. Inside, fitted neoprene compartments organize your gear for easy access, while a durable, water-resistant zipper guards against moisture. Plus, a bottom compartment with a Velcro closure securely stores your multi-tool away from your spare tube, eliminating the possibility of a premature puncture. The M-Caddy also boasts a reflective taillight loop for safety.

Lezyne's Roll Caddy features a simple roll-up design constructed of a durable nylon fabric for your daily ride necessities. Strap it to your saddle rails or toss it in your pack. The large, adjustable nylon strap slides easily to secure and accommodate what's inside, and the wide open pockets can fit a 29" tube or a pair of tire levers. The Roll Caddy has an internal zipper pocket to secure your small items.

Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

- Expands up to 2x size to securely grip any shape - Weatherproof material will not deteriorate - Molded non-scratch hooks

Are you looking for an incredibly simple way to mount your phone to your bicycle? Do you want that case to have a plethora of mounting options and accessories? Well... look no further than the ElastoKASE from BiKASE. Utilizing the 1/8 turn connection of the GoKASE and the simplicity of a rubber lined, gripping shock cord, the ElastoKASE is your "go to" phone or anything case. • Phone holder for 6-inch phones and smaller • Works with GoKASE attachments and brackets • Material: TPE & Shock Cord